Editing Door trim -Re-trimming (section)

==What you'll need==

To disassemble the door trim (also known as door card) you will need the following:

*Phillips head screwdriver
*Flat head screwdriver
*Pliers
*Quick un-pick

[[image:Door card 001.jpg]]


To reassemble the door trim, you will need the following:

*Fabric of your choice, you will need about 3 metres
*Dacron wadding - available from [http://www.spotlight.com.au/ Spotlight], or thin foam -available from [http://www.clarkrubber.com.au/ Clark rubber]
*Phillips head screwdriver
*Flat head screwdriver
*Staple gun + 6mm staples
*Scissors
*Hobby knife
*Cardboard spacers (this will be explained later)
*Gaffer tape (optional, but always handy!
*Spray adhesive
*Contact adhesive (I used Selleys Kwik Grip, but ran out when I was almost finished, scoured the shed for more glue, and found some "Tweetens ten minute cement" ...... the tube says it's the strongest in the world! 
*Sewing machine or needle
*Cotton to match your colour fabric
*Dressmaking chalk
*Newspaper
*Metal skewer
*Dust mask (optional)
*A container for the screws you remove
*A bin for all the stuff you'll be throwing out.

[[image:Door card 002.jpg]]