Editing HICAS - Removal (section)

===Steering Rack===
The easiest thing to do here is keep your import KYB hicas rack. It has a quick ratio at 2.5 turns lock to lock (Aus is 3.25). R32/33 rack can be used but will require custom lines. The import rack will also accept R32 tie rods if you wish to do the S13 coilover conversion.
Import rack mod - easy. On the rear of the rack body there is a valve with four lines going into it. Two lines go towards the back of the car, and one pressure line from the hicas solenoid, and a return to the reservoir. Disconnect these and seal the ports to stop leaks and dirt getting in. Automotive power steering threads are unique and its not possible to buy plugs, so make your own out of the discarded lines. Cut the end off leaving about an inch of steel line sticking out, flatten it in a vice and fold it on itself to seal, done (PIC)