Editing Manual Conversion (section)

==Wiring HR31==

Hey, just like to clear up the pinout on the inhibitor switch plug on HR31's to make them start and reversing lights work - I just worked this one out today. This is the grey 8 pin plug near the battery on an auto HR31:

Splice 1 to 7 to bypass the inhibitor switch, which you can now snip off! Connect 1 and 6 to the reverse switch on your newly installed manual gearbox and voila! My car had the inhibitor switch jammed under the brake booster all taped up, the other unused wires (2, 3, 4, 5, & 8.) aren't needed and can be chopped. Colours are all different to S3 Ausdel as well.

-crayman



'''Contributors:''' projekt31, Smity42, crayman