Editing Door trim -Re-trimming (section)

==Out with the old==

If you have courtesy lights in your trims, undo the screws, remove the light, and put it somewhere safe.

[[image:Door card 003.jpg]]


Turn your door trim over, and undo all the screws, and put the vinyl capping and map pocket somewhere where they won't get covered in glue.
Put all the screws in a container so you don't misplace any!
Remove all the staples.
I tried a staple remover, but it was much easier to slide the flathead screwdriver under the staples and pry them up.
Some may not want to come all the way out, once you've lifted them a bit, use the pliers to pull them the rest of the way out.

[[image:Door card 004.jpg]]


When you've removed all the staples, peel the fabric and the padding off and throw it in the bin.
Put the masonite to the side, and move on to the arm-rests.

[[image:Door card 009.jpg]]