Editing Tail lights -Taking apart tinting sealing (section)

==With?==
Go and grab the following:

*1x bottle of metho (you won't need an entire bottle)
*1x empty ice cream container (or any container, doesn't matter)
*2x rags

[[File:TailTintRm02.jpg|640px|center|link=]]

Fill up your container with water, put a fair bit in because you'll want to make sure you get all the metho off. Take everything out to where your going to be working. Before you start, it's a good idea to open your boot. If you don't, you may accidentally get metho on your garnish, and it leaves a horrible mark that won't come off.