Editing Turbocharging (section)

==Other Pictures==

'''Here are some other pictures of things you will need to turbo charge your n/a r31... so you guys dont have to think... hopefully it will result in more people doing it :P'''

[[Image:bottom.JPG|200px]]
[[Image:intake.JPG|200px]]
[[Image:crossover.JPG|200px]]
[[Image:turbo.JPG|200px]]
[[Image:drain.JPG|200px]]
[[Image:tape.JPG|200px]]
[[Image:tee.JPG|200px]]
[[Image:hose2.JPG|200px]]
[[Image:gaskets.JPG|200px]]
[[Image:gaskets2.JPG|200px]]
[[Image:hose.JPG|200px]]
[[Image:90deg.JPG|200px]]


'''Ok, explanation time'''


From the left, you have, bottom or lowerpipe that goes from turbo dump to cat.

Next is the intake bit that goes at the front of the turbo

Then the crossover

Here we have a stock T3 with oil and water lines on it, a dump pipe attached, a manifold attached and an actuator

Now this is the oil drain block fitting

You'll need this tape to put on the thread so it doesn't leak

Here's a t-piece and the next photo is where it goes... its for water return

Gaskets and more gaskets

Mics hoses, don't forget lots of hose clamps, these are for water return and for back breather to intake :D

90deg bit for oil drain

I got all the parts at pirtek or enzed