Editing Street Tuning (section)

==Step 2.  Setting idle mixtures==

car was idling at around 10% load, so mixtures were adjusted to give 14.7-15 at this load at 700rpm. Need to keep in mind that adjacent load cells will also effect the mixture, so adjacent cells will also need to be fairly close to the currently highlighted cell in the fuel map
I set the whole range of rpm to the same value as the idle AFR for now, at 10% load. At this time i estimated some values for the rest of the fuel map.
i just increased the injector rate by 1ms for every 10% increase in load, with no change in fuel rate for the rpm at the moment.