Editing Fuel Pump Upgrade (section)

==Comment 1==

That is exactly how I have had mine done for years now and it has never missed a beat.  The first time I fitted the fuel pump, I used stock wiring and the pump barely turned over.

The only issue I had with mine was the positioning of the pump height wise in the bottom of the tank.  Using a ruler I measured from the bottom of the tank to the top of the tank on the flange where the pump/sender bracket bolts to.

Then I measured from the underside of the mounting flange on the pump bracket and positioned the bottom the pump 10-15mm from the bottom of the tank. this has seen me get stuff all fuel surge at 1/4 of a tank.

I used to have the pump about 20mm or so from the bottom and got bad surge with anything less then 1/2 a tank.

Anything closer than 10mm can see the pump suck an 'air pocket' so to speak.

- '''Devious Jet'''