Editing Manual Conversion (section)

==Clutch pedal==

This is a real pain because an air conditioning duct is in the way of getting the pedal up in the right position.
The best way of installing this is to remove the air-conditioning duct and persist with it.
I got mine in without removing it, it's possible but it takes time.
Holes are already exist, you need to undo the bolts from under the bonnet.
They are two small bolts with a plate covering the hole for the master cylinder and the pedal.
It's best the have the master cylinder ready to install at this time as well because it saves having to undo the bolts twice.
All up there is three bolts holding the clutch pedal in place.
Two onto the firewall and 1 8mm bolt up above, below the dash.
You will see the bolt hole and the hole it screws into.
Hopefully the wreckers will provide you with this bolt but otherwise any M8 (metric 8mm) bolt will fit.