Editing Master Cylinder Upgrade (section)

===Installing new master===
Grab your Master and sit it over the booster, You will now be bending the lines so they match up! Look at your master cylinder and you will see 'F' and 'R', This is important that you lines go into the right outlets or you will have some explaining to do when you slide into the next car!! You will see one line that goes straight down under the car, that is for the rear 'R' (obviously) and the front lines fit up to the 'F'.

Bend the lines carefully so they line up with the outlets on the master, you may have to straighten out some bends to give some more length, especially the rear line as it's originally fitted underneath close to the booster, now it's at the end of the master too the side.

[[File:MCUpgrade6.jpg|640px|center|link=]]

Double check everything is secure and tight. Check the brake pedal is smooth!

All that is left to do is [[Bleeding Brakes|bleed the brakes]]!