Editing XF Throttle body (section)

==The piping==

Now you need to do something about your intake piping as the XF TB is much longer then the RB30 one.
Get some nice chrome looking 3" pipe to make good use of your need big new TB.

I used the 3 inch piping from a VN / VP commodore.
To do this, move the [[AFM]] up near the TB, and get a flange bit that connects onto the top half of a VN airbox (because its 3") and bolt it onto the end of the [[AFM]].
Use the top half of a VN airbox also for your airbox, and connect the intake piping on.
You will need to cut the plastic pipe shorter so it will fit in.

Stuff I got from a VN commodore.

[[Image:XFTB15.jpg]]

Completed

[[Image:XFTB16.jpg]]



'''Compiled by'''

Pastical - [http://www.calaisturbo.com.au Calais Turbo]