Editing Fuel Injector Replacement (section)

== Removing injectors from the rail:==

[[Image:Injectorchange13.jpg|640px|center|link=]]

All the injectors are held to the rail by a rubber hose and a clamp. Simply undo the clamp and pull / twist the injector off. Some force may be required, depending on the age and condition of hose etc.

* In the event that you are removing your injectors, having them cleaned and flowed, my suggestion (as I've been taught and told) would be to replace the fuel hose. To get the hose off the injector end, you can use a soldering iron rather than a blade to pierce the hose and cut it in order to get it over the barb fitting. Pulling, you're unlikely to have much success.