Mounting JDM Number Plates: Revision history

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

1 September 2024

  • curprev 05:0805:08, 1 September 2024‎ GavinG7 talk contribs‎ 1,644 bytes +1,644‎ Created page with "The screw holes for jap plates and the holes in the bootlid for aus plates are out. First thought was to re-drill the plates but: 1. re-drilling plates looks cheap and tacky 2. the 2 holes needed to be drilled right in the middle of the script ==Supplies== 1m x 50mm x 6mm flat bar (6mm thick, 50mm wide, 1m long - shortest off the shelf length) 1x packet of metal tek screws M10x16mm (i chose the flat head with star point "phillips head" drive) 1x packet of 3/4 flat w..."
Retrieved from "https://test-wiki.r31skylineclub.com/index.php/Mounting_JDM_Number_Plates"