Clutch Specifications
Clutch Tech
Skyline
| Clutch Disc Diameter (mm): | 240mm |
| Clutch Disc Spline Count: | 24 |
| Clutch Disc Spline Diameter (mm): | 25.4mm |
| Clutch Control: | Hydraulic |
| Master cylinder I.D. mm: | 15.87 (5/8") |
| Slave cylinder I.D. mm: | 19.05 (3/4") |
| Spigot Bearing: | 16.00mm ID x 20.62mm OD x 17.53mm L (Industry # ASB520) |
| Flywheel Step: | +0.17mm (Flat step will still work) |
| Ring Gear Teeth Count: | 120 |
| Pivot Ball: | Thread - 10x1.5, Ball Dia-16.55mm, UHL-15.5mm, Ball Height-26mm, Overall Hight-41.5mm, 17mm Hex |
| Flywheel Bolts: | Thread - 12x1.25, UHL - 30mm, Torque Setting - 132 Nm |
| Pressure Plate Bolts: | Thread - 8x1.25, UHL - 17.3mm, Torque Setting - 32 Nm |
Pintara
| Clutch Disc Diameter (mm): | 225mm |
| Clutch Disc Spline Count: | 24 |
| Clutch Disc Spline Diameter (mm): | 25.4mm |
| Clutch Control: | Hydraulic |
| Master cylinder I.D. mm: | 15.87 (5/8") |
| Slave cylinder I.D. mm: | 19.05 (3/4") |
| Spigot Bearing: | 16.00mm ID x 20.62mm OD x 17.53mm L (Industry # ASB520) |
Compiled by:
WKD-031